Editing Waypoint Details - Raymarine RC435 Owner's Handbook Manual

52

Editing Waypoint Details

The name, symbol and position of a waypoint can be changed, either by
means of the cursor or via the Waypoint List.
Note: The target waypoint cannot be edited.
➤ To edit a waypoint using the cursor:
1. Place the cursor over the waypoint.
2. Select WAYPOINT OPTIONS and press ENTER to display the Edit Way-
point function bar.
3. Select EDIT WAYPOINT. The Edit Waypoint function bar is displayed.
4. To edit the waypoint name, select EDIT NAME.
The NAME WAYPOINT window is displayed.
5. Use the trackpad to enter or edit the name as follows:
• Use trackpad left/right to move the cursor to the character to be
changed. Up to eight characters can be used.
• Use trackpad up/down to scroll through the characters.
• When editing is complete, press ENTER; the waypoint name is
updated and the window is removed
6. To edit the symbol, select EDIT SYMBOL.
The SELECT SYMBOL options are displayed.
7. Use trackpad left/right to highlight the desired symbol, then press
ENTER.
RC435 and RC435i Chartplotters
D4673-1
D4674-1