Multifunction Display - Benelli 2009 TREK1130 Workshop Manual

GEN
INFO

MULTIFUNCTION DISPLAY

1
DISPLAY DISPLAY
It indicates the speed.
The value can appear in kilometres (Km/h) or in miles
(mph).The value on the high full scale is of 320 Km/h
(198.8 mph).
2
TOTAL ODOMETER
"Total"
It indicates the total run from 0 to 999999 Km or Mi.
"Chrono" Chronometer
It indicates the run time expressed in minutes,
seconds an hundredths.
"Clock"
It indicates the hour (0-12) and the minutes.
3 PARTIAL ODOMETER
"Trip"
It indicates the partial run from 0 to 999999 Km or Mi.
"Lap"
In "Chrono" mode, it indicates the average time and
once the chronometer is stopped, it indicates the
real time.
1
2
3
1 3
SERVICE WARNING LIGHT S
4
It switches on for the first time after 1.000 Km (621 Mi)
then every 10.000 Km (6.213 Mi).
Every time it switches on, contact an authorised after
-sales centre as soon as possible and carefully follow
the indications in the maintenance and control tables
in this manual.
Together with the warning light the flashing wording
"Service" is displayed instead of the partial odometer
"Trip" for 10 seconds at every vehicle ignition.
5 THERMOMETER T
It indicates the ambient temperature.
The value can appear in degrees Centigrade (°C) or in
Fahrenheit (°F).
The indication field is between -30 and +50 °C or -22
and +122 °F.
NOTE: N
During displaying of °F with values above 99°F, the D
value of the hundredths is not present, but it is,
however, understood.
FUEL LEVEL
6
It indicates the amount of fuel inside the tankwith an
eight bar diagram.
4
FEATURES
6
5