Cooling Liquid Control - Benelli 2009 TREK1130 Workshop Manual

CHK
ADJ
3 42

COOLING LIQUID CONTROL

C
1 Park: P
• the bike levelled.
NOTE: N
• Place the bike on a suitable trestle. •
• Ensure that the bike is in straight position.
2 Check:
• the cooling liquid level
the cooling liquid level must be between the
maximum level reference (MAX)
minimum level (MIN)
If below the minimum level notch
MAX
correct level using recommended cooling liquid.
MIN
2
3 Remove:
• the right tank lid
See "FRAME 4.112" paragraph.
• the engine protection
See "FRAME 4.120" paragraph.
4 Remove:
• the radiator cap
WARNING
If the radiator is very hot, the liquid inside will be
pressurised. Do not remove the radiator cap with
the engine hot. Boiling hot liquid may leak, caus-
ing serious injuries. When the engine has cooled
down, open the radiator cap as follows:
Position a towel on the radiator cap and slowly
4
loosen the cap anti-clockwise to drain any residue
pressure.
When the usual hiss is no longer heard, press on
the radiator cap and loosen it anti-clockwise to
remove it.
ENGINE/COOLING LIQUID
and that of the
.
top-up to the