Connections Control - Benelli 2009 TREK1130 Workshop Manual

GEN
INFO
1 11
C

CONNECTIONS CONTROL

Check there are no stains, rust, humidity, etc. on the
cables, the couplers and the connectors.
1 Disconnect:
• the wire
• the coupler
• the connector
1
2 Check:
• the wire
• the coupler
• the connector
If there are traces of humidity
In the presence of rust/stains
disconnect the parts various times.
2
3 Check:
• all connections
If there are loose connections
correctly.
N OTE: N
If the foot
it.
3
4 C Connect:
• the wire
• the coupler
• the connector
N OTE: N
Check that all connections are securely installed.
4
5 C Check:
• continuity •
( (with a pocket tester)
NOTE: N
• • If there is no continuity, clean the terminals.
• To check the wiring, follow the procedure from
point
• As quick remedy, we recommend using a specific
product for the contacts, found in spare parts
shops.
5
CONNECTIONS CONTROL
of the terminal box is bent, straighten
to .
Dry using a fan.
Connect and
Connect them