Front Panel Setup Menu; Lan Main Setup Menu - Brother NC-9100h Network User's Manual

10

Front Panel Setup Menu

10

LAN Main Setup Menu

Wtih the Network (LAN) Board (NC-9100h Print/Fax Server)
installed, you can connect your DCP/MFC into the network to use the
Internet FAX, Network Scanner and Network Printer.
1
Install the Network (LAN) Board (NC-9100h) (See User's Guide
Chapter 23)
2
Set up the DCP/MFC for your Network using teh control panel.
You can also set up using BRAdmin, Web BRAdmin and so
on. (See Chapter 11 or visit at: http://solutions.brother.com)
The LAN menu selections allow you to setup the Brother DCP/MFC
for your network and Internet Fax configuration. Press
press the appropriate number for LAN, based on the selections
displayed on your machine. After you have displayed the LAN Main
Setup menu, there are seven main selections: Setup TCP/IP, Setup
Internet, Setup Mail RX, Setup Mail TX, Setup Relay, Setup Misc
and Scan to E-mail. Proceed to the menu selection you wish to
configure.
Please note that once you have specified a valid IP address for the
machine, it is also possible to configure many aspects of the DCP/
MFC using your favorite web browser. For added flexibility, the DCP/
MFC is supplied with the BRAdmin Professional Windows
which also can be used to configure many aspects of the NC-9100h.
FRONT PANEL SETUP MENU 10 - 1
Menu
then
®
software,