Windows ® 95/98/Me Peer-To-Peer (Hp Jetadmin Compatible Method) Troubleshooting; Windows ® 95/98/Me/2000/Xp/Nt 4.0 Peer-To-Peer Print (Netbios) Troubleshooting - Brother NC-9100h Network User's Manual

®
Windows 95/98/Me Peer-to-Peer (HP JetAdmin
compatible method) Troubleshooting
If you are having trouble printing on a Windows
Peer network, check the following (HP JetAdmin compatible
method):
1
If the Print/Fax server does not show up under JetAdmin on a
®
Windows
the Windows
Control panel and then reinstalling them as follows:
■
First install the IPX/SPX-Compatible Protocol (or the TCP/IP
protocol if you are using a later version of JetAdmin), the
Client for Microsoft Networks, and the network adapter card
driver.
■
Install the Latest HP JetAdmin software.
■
Restart the system, and then add the HP JetAdmin service.
®
Windows 95/98/Me/2000/XP/NT 4.0 Peer-to-Peer
Print (NetBIOS) Troubleshooting
If you are having trouble printing on a Windows
NT 4.0 (or later) Peer-to-Peer network (NetBIOS), check the
following:
1
Make sure that the Brother NetBIOS Port driver is securely
installed and configured according to the Windows
2000/XP/NT 4.0 Peer-to-Peer (NetBIOS) chapters. You may
find that during the installation of the port driver, the screen that
prompts you for a Port name is not displayed. This happens on
some Windows
the ALT and TAB keys to make it appear.
2
Make sure that the Print/Fax server is configured to be in the
same workgroup or domain as the rest of your computers. It may
take several minutes for the Print/Fax server to appear in the
network neighborhood.
13 - 8 TROUBLESHOOTING
95/98/Me Peer-to-Peer network, try removing all of
®
95/98/Me network software from the Network
®
95/98/Me/2000/XP/NT 4.0 computers. Press
®
95/98/Me Peer-to-
®
95/98/Me/2000/XP/
®
95/98/Me/