Control Panel Setup; Lan Menu; Wired Lan Tcp/Ip / Wlan Tcp/Ip - Brother Print Server Network User's Manual

6

Control panel setup

LAN menu

Before using your Brother product in a network environment, you need to configure the correct TCP/IP
settings.
In this chapter, you will learn how to configure the network settings using the control panel, located on the
front of the machine.
The LAN menu selections of the control panel allow you to set up the Brother machine for your network
configuration. Press Menu, then press a or b to select LAN. Proceed to the menu selection you wish to
configure. See Function table and default factory settings on page 118.
Please note that the machine is supplied with the BRAdmin Light Windows
applications for Windows
network. See Using the Remote Setup to change the print server settings on page 16 a for wired connection
or Changing the print server settings on page 26 for a wireless connection.

Wired LAN TCP/IP / WLAN TCP/IP

If you connect the machine with the Ethernet cable to your network, use the Wired LAN menu selections. If
you connect the machine to a wireless Ethernet network, use the WLAN menu selections.
This menu has nine sections: BOOT Method, IP Address, Subnet Mask, Gateway, Node Name,
WINS Config, WINS Server, DNS Server and APIPA.
BOOT Method
This selection controls how the machine obtains an IP address. The default setting is Auto.
Note
If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the BOOT
Method to Static so that the print server has a static IP address. This will prevent the print server from
trying to obtain an IP address from any of these systems. To change the BOOT Method, use the machine's
control panel, BRAdmin Light utility or Remote Setup.
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
(For Wired) Press a or b to select Wired LAN.
(For Wireless) Press a or b to select WLAN.
Press OK.
d
Press a or b to select TCP/IP.
Press OK.
® ®
and Macintosh , which also can be used to configure many aspects of the
®
software and Remote Setup
6
6
6
6
6
78