Brother NC-9100h Network User's Manual page 66

3
One or more Print/Fax servers will appear in the list (the default
node names are BRN_xxxxxx , where xxxxxx is the last six
digits of the Ethernet address (MAC address)).
You can find the node name and MAC address by printing
out the printer configuration page. Refer to the User's Guide
Chapter 23 for information on how to printer the configuration
page on your Print/Fax server.
4
Select the Print/Fax server that you wish to configure and
double click it. You will be asked for a password. The default
password is access .
5
Select the NetWare tab.
If necessary change the Print/Fax Server Name. The default
NetWare Print/Fax server name will usually be
BRN_xxxxxx_P1 where xxxxxx is the Ethernet address of
the Print/Fax server. Be careful! Changing the name may
impact the configuration of other protocols because the print
server service names will be altered.
a
If it is not already selected, select Queue Server as the
operating mode.
b
Click the Change Bindery Queues button.
c
Select the NetWare server which you wish to configure.
d
Select the New Queue button and type in the queue name
which you wish to create.
e
Once you have done that highlight the queue name you
created and click on the Add button.
f
Click on Close and then OK.
Now exit the BRAdmin Professional utility. You are ready to print.
NOVELL NETWARE PRINTING 6 - 7