How To Select The Print Server (Tcp/Ip) - Brother NC-9100h Network User's Manual

Printing the configuration page will allow you to confirm the MAC
address. Please refer to the User's Guide Chapter 23 for information
on how to print the configuration page.
8
From the Printer Model pull-down list select your model.
9
Click Add and the printer will be available from the Printer List.

How to Select the Print Server (TCP/IP)

After installing the PPD, use the following steps to select the printer driver:
1
Turn the power of the printer ON.
2
Open the Applications folder.
3
Open the Utilities folder.
4
Open the Print Center Icon.
5
Click the Add Printer button.
6
Select LPR Printers using IP.
7
Enter the TCP/IP address of the printer into the LPR Printer's
Address box.
Printing the configuration page will allow you to confirm the TCP/IP
address. Please refer to the User's Guide Chapter 23 for information
on how to print the configuration page.
8
If you are not using the default Queue enter the Queue name
you are using.
9
From the Printer Model pull-down list select your model.
10
Click Add and the printer will be available from the Printer List.
APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 10