Net Bios/Ip; Ethernet - Brother NC-9100h Network User's Manual

Net BIOS/IP

The NC-9100h Print / Fax Server supports SMB (Server Message
Block) over the TCP/IP protocol via the NetBIOS interface. This
means that just like regular Windows
can appear in your network neighborhood. The main advantage of
NetBIOS printing is that you are able to print from legacy DOS
applications that are running on PC's that are connected to Microsoft
networks.
1
(For MFC) Press
(For DCP) Press
2
Press
3 Set
Press .
4 Stop/Exit
Press

Ethernet

Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT half duplex mode by
auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print
server link mode. This change is valid after the print server has been
reset.
If you incorrectly set this value, you may not be able to
communicate with your print server.
1
(For MFC) Press
(For DCP) Press
2
Press
10B-FD/10B-HD .
3 Set
Press .
4 Stop/Exit
Press
Menu 6
, ,
Menu 4
, ,
or to select On or Off .
.
Menu 6
, ,
Menu 4
, ,
or to select Auto/100B-FD/100B-HD/
.
FRONT PANEL SETUP MENU 10 - 19
®
PC's the Brother DCP/MFC
6 5
, .
2 5
, .
6 6
, .
2 6
, .