Choices Available From The Configuration/Setup Main Menu - IBM eServer xSeries 300 User Reference Manual

Choices available from the Configuration/Setup main menu

From the Configuration/Setup Utility main menu, you can select settings that you want
to change. The Configuration/Setup Utility main menu is similar to the following
illustration:
Notes:
1. You can press F1 to display help information for a selected menu item.
2. The choices on some menus might differ slightly from the ones that are described
Descriptions of the choices that are available from the main menu are as follows:
•
•
•
•
14
xSeries 300: User's Reference
CMOS Setup Utility - Copyright (c) 1984 - 2000 Award Software
Move
in this book, depending on the version of BIOS code in your server.
System Summary
Select this choice to display configuration information. This includes the type and
speed of the microprocessor and the amount of memory that is installed.
Changes that you make to configuration settings appear on this summary screen.
You cannot edit the fields.
This choice appears on both the full and limited Configuration/Setup Utility
menus.
Product Data
Select this choice to view system information, such as the machine type and
model, the server serial number, and the revision level or issue date of the BIOS
code that is stored in the flash electrically erasable programmable read-only
memory (EEPROM).
Devices and I/O Ports
Select this choice to view or change the assignments for devices and input/output
ports. This choice appears only on the full Configuration/Setup Utility main menu.
Start Options
Select this choice to view or change the start options. Start options take effect
when you start your server.
You can select keyboard operating characteristics, such as the keyboard speed.
You also can specify whether the server starts with the keyboard number lock on
or off.
Configuration/Setup Utility
Select Option:
System Summary
Product Data
Devices and I/O Ports
Start Options
Frequency Control
Date and Time
System Security
Advanced Setup
Power Management Setup
Save & Exit Setup
Load Optimized Defaults
Exit Without Saving
Enter: Select F1: General Help
F10: Save ESC: Exit