Choices Available From The Configuration/Setup Main Menu - IBM eServer xSeries 345 Type 8670 User Manual

Choices available from the Configuration/Setup main menu

From the Configuration/Setup Utility main menu, you can select settings that you
want to view or change. The Configuration/Setup Utility main menu is similar to the
following.
Notes:
1. You can press F1 to display help information for a selected menu item.
2. The choices on some menus might differ slightly, depending on the BIOS
Descriptions of the choices available from the main menu are as follows:
v System Summary
v System Information
v Devices and I/O Ports
16
IBM xSeries 345 Type 8670: User's Guide
IBM Setup - (c) Copyright IBM Corporation 2002
Configuration/Setup Utility
•
System Summary
•
System Information
•
Devices and I/O Ports
•
Date and Time
•
System Security
•
Start Options
•
Advanced Setup
•
Error Logs
Save Settings
Restore Settings
Load Default Settings
Exit Setup
<F1> Help
<Esc> Exit
version in your server.
Select this choice to display configuration information. This includes the type,
speed, and cache sizes of the microprocessors and the amount of memory
installed.
Changes that you make to configuration settings appear on this summary screen.
You cannot edit the fields.
This choice appears on both the full and limited Configuration/Setup Utility
menus.
Select this choice to display information about your server. Changes that you
make on other menus might appear on this summary screen. You cannot edit
any fields. The System Information choice appears only on the full
Configuration/Setup Utility main menu.
– Product Data
Select this choice to view system information, such as the machine type and
model, the server serial number, and the revision level or issue date of the
BIOS and diagnostics code stored in the electrically erasable programmable
ROM (EEPROM).
Select this choice to view or change the assignments for devices and
input/output (I/O) ports. This choice appears only on the full Configuration/Setup
Utility main menu.
You can use this choice to enable or disable the integrated SCSI and Ethernet
controllers, and some standard ports.
< > < > Move ↑ ↓
<Enter> Select