Table 8. POST beep codes.
Beep Code
1-1-2
Microprocessor register test has failed.
1-1-3
CMOS write/read test has failed.
1-1-4
BIOS ROM checksum has failed.
1-2-1
Programmable Interval Timer test has failed.
1-2-2
DMA initialization has failed.
1-2-3
DMA page register write/read test has failed.
1-4-3
Interrupt vector loading test has failed.
2-1-1
Secondary DMA register test has failed.
2-1-2
Primary DMA register test has failed.
2-1-3
Primary interrupt mask register test has
failed.
2-1-4
Secondary interrupt mask register test has
failed.
2-2-1
Interrupt vector loading has failed.
2-2-2
Keyboard controller test has failed.
2-2-3
CMOS power failure and checksum checks
have failed.
2-2-4
CMOS configuration information validation
has failed.
2-3-2
Screen memory test has failed.
2-3-3
Screen retrace tests have failed.
2-3-4
Search for video ROM has failed.
2-4-1
Screen test indicates the screen is operable.
3-1-1
Timer tick interrupt test has failed.
3-1-2
Interval timer channel 2 test has failed.
3-1-3
RAM test has failed above address hex
0FFFF.
3-1-4
Time-of-Day clock test has failed.
3-2-1
Serial port test has failed.
3-2-2
Parallel port test has failed.
3-2-4
Comparison of CMOS memory size against
actual has failed.
3-3-2
I2C bus has failed.
2-3-1
Screen initialization has failed.
Description
Action
Call for service
Turn off the server and then
restart the server. If the
problem remains, call for
service.
Chapter 6. Solving problems
61