Infinite Peripherals PP-50 Developer's Manual page 25

. .
. .
. .
. .
Command Details (Cont.)
.
ESC a
Alignment
[Code] [1Bh] + [61h] + n
n has a value between 0 and 2 or between '0' and '2'.
Default value is "0".
ESC c5
Enabling/Disabling The function of the LF button
[Code] [1Bh] + [63h] + [35h] +n
n may have a value between 0 to 255 but only the LS bit is of importance.
The default value is "0".
ESC d
Printing and Advancing paper by n lines
[Code] [1Bh] + [64h ] + n
n may have a value between 0 to 255.
The data, accumulated in the graphic buffer is printed out and paper is advanced
to n lines.
The beginning of the line is accepted as a new starting position for print.
ESC v
Receiving the printer status
[Code] [1Bh] + [76h]
The printer returns one byte in which only bit 2 is defined. Its meaning is:
Value 0:
Value 1:
Infinite Peripherals, Inc.
www.ipcprint.com
Version 2.00
0 or '0' Left alignment
1 or '1' Center aligned
2 or '2' Right aligned
Value 0: The LF button is enabled.
Value 1: The LF button is disabled.
There is paper
No paper
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 24