Infinite Peripherals PP-50 Developer's Manual page 23

. .
. .
. .
. .
Command Details (Cont.)
.
ESC J
Print and feed paper by n/203 inch
[Code] [1Bh] + [4Ah] + n
n may have a value from 0 to 255.
Prints the data, accumulated in the graphic buffer, and advances paper to n/203
inches.
The set shifting is valid only for the current command.
The beginning of the line is accepted as a new starting point for printing.
ESC S
Setting the interface transmit speed (baud rate)
[Code] [1Bh] + [53h] +n
Sets the new baud rate value for the serial interface. The command is not executed in
the IrDA mode. Possible values of the parameter n are:
0 or '0':
1 or '1':
2 or '2':
3 or '3':
4 or '4':
The set baud rate is valid only when controlling the printer via a serial cable. The last
set value remains valid after printer switch-OFF even when it has not been operated
in the IrDA mode.
The default value is 1 (9600 bps).
ESC T
Printing short diagnostic information
[Code] [1Bh] + [54h]
ESC V
Setting/Canceling 90º rotated symbols
[Code] [1Bh] + [56h] + n
n may have a value between 0 to 255 but only the LS bit is of importance.
0 Cancel 90º rotation of symbols.
1 Set to 90º rotation of symbols.
Rotated symbols are not underlined.
Infinite Peripherals, Inc.
www.ipcprint.com
Version 2.00
2400 bps
9600 bps
19200 bps
57600 bps
115200 bps
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 22