Canon EOS DIGITAL REBEL XTI Service Manual page 49

21．Customization
21-1 Custom Functions:
22．External Interface
22-1 Digital terminal:
Video output terminal: Provided (NTSC/PAL)
22-2
22-3 Remote control
terminal:
22-4 Wireless remote
control
23．Power Source
23-1 Battery:
23-2 Main switch:
23-3 Start-up time:
23-4 Battery check:
Power-saving feature Power turns off after the set time of non-operation elapses.
23-5
(Auto power off):
23-6 Date/time back-up
battery:
11 Custom Functions with 29 settings
camera.
USB 2.0 Hi-Speed, mini B port
Compatible with Remote Switch RS-60E3 (2.5 mm dia. mini-
jack)
1)Compatible with Remote Controller RC-1 and RC-5
2) Wireless remote control receiver built-in inside the camera
grip.
⑴Compatible shooting modes: All
⑵ Operation setting: When the Drive mode button is pressed,
the self-timer/ wireless remote control timer icon is
displayed on the LCD
⑶ Operation range: Within approx. 5 m/16.4 ft. (at front and
center)
⑷ Operation indicator: (RC-1: Shutter release after 2 sec.
and when RC-5 is used.) Same as last 2 sec. of self-timer
indicator.
Battery Pack MB-2LH×1
⑴With the AC Adapter Kit ACK700, AC power is possible.
⑵ With BG-E3, two battery packs can be used. Or six size-AA
batteries can be used.
Two settings: OFF/ON
・ Power turns off if the CF card slot cover or battery
compartment cover is opened.
Approx. 0.2 sec.
Automatic battery check when the main switch is turned on.
The battery level is indicated by one of
monitor.
・ Select from the menu's [Auto power off] the time:
4, 8, 15 min, or off.
1)Lithium CR2016 button battery ×1
2)Battery life approx. 5 years
⑴No backup battery warning.
⑵Date/time is reset when the battery is replaced.
44
General Information
settable with the
monitor.
four levels on the LCD
30 sec.,1, 2,