Canon EOS DIGITAL REBEL XTI Service Manual page 28

6-7 Viewfi nder
information:
r-(j )
G G
G
0
G
G G
I::J
6-8 Mirror:
6-9 Viewfinder blackout
time:
6-10 Mirror lockup:
6-11 Mirror cut-off:
6-12 Depth-of-field
preview:
6-13 Eyepiece shutter:
6-14 Mise.:
1)0n the screen
CD
AF points (9)
2)Below the screen (Major information)
@ AE lock, AEB in progress (blinks)
General Information
@
Flash ready, insufficient flash warning during FE lock
(blinks)
@ High-speed sync (FP flash)
®
FE lock, FEB shooting (blinks)
®
Flash exposure compensation
(f) Shutter speed (if camera shake will occur, it blinks),
bulb, FE lock (FEL), Processing data (buSY), built-in flash
recycling (buSY)
®
Aperture
(if
unsuitable, it blinks)
®
Exposure level display: Exposure compensation, Manual
exposure level, AEB level, Red-eye reduction lamp on time
display
@> White balance correction
@ Max. burst
@ AF focus confirmation (blinks when focus cannot be
achieved), MF focus confirmation
@ CF card full warning (FuLL CF), CF card error warning (Err
CF), No CF card warning (no CF)
Quick-return half mirror (Transmittance: reflectance ratio of
40:60)
Approx. 170 ms at 1/60 sec. or faster speeds.
Enabled with C.Fn-7 -1.
(l)SW-2 ON for mirror up
-7
SW-1 OFF
-7
SW-2 ON for shutter
release.
(2)Mirror lockup is maximum 30 sec. (after 30 sec., the mirror
goes back down and exposure stops.)
No mirror cut-off with lenses up to EF600mm f/4L IS USM
Enabled with depth-of-field preview button
(l)Enabled in Creative Zone modes only.
(2)With Speedlite 580EX, SSOEX, 430EX, 420EX, MR-14EX, or
MT-24EX, pressing the depth-of-field preview button fires a
modeling flash.
None (Eyepiece cover provided on strap)
Eyecup Ef provided
23