Canon EOS DIGITAL REBEL XTI Service Manual page 123

Repair Information
3) Remova I of the Mirror Box Ass'y
(l)Remove two screws to remove the Mirror Ass'y and remove the metal fitting.
(2)Remove the Mirror Spring and remove the Mirror Box Ass'y in the oblique direction.
Fig. 102 Fig. 103 Fig. 104
4 ) Remova I of the Mount Contact Ass'y
(l)Rotate the shutter cam gear and make the mirror go up.
(2)Remove three screws from the Motor Drive Ass'y and the Motor Unit and be careful not
to lose the spring gear.
(3)Remove the Shutter Charge Gear group.
(4)Remove the MIF FPC.
(5)Remove two screws and the Mount Contact Ass'y.
'
Fig. 105
5 ) Remova I of the Mount
(l)Remove four screws and the Mount.
(2)Remove the mount spring, lens unlock lever,
and the coil spring.
r - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ,
R\IU@I 2I
The screws to fix the Mount
cannot be reused, so replace
them with new ones when
assembling and apply the
specified expendable.
32
I
Fig. 106
*
EOS KISS DIGITAL N is used for the sample picture.
Fig. 107
*
EOS KISS DIGITAL N is used for the sample picture.