Canon EOS DIGITAL REBEL XTI Service Manual page 113

<Disassembly Procedures>
1 ) Removal ofthe Tripod Socket Plate
Remove four screws and the Tripod Socket Plate.
R\IU@I 1
I
Disassembly is not usually
performed because
it requires making
adjustments when the
AF Unit is disassembled.
Screws cannot be reused,
so replace them with new
ones when assembling.
3 ) Removal of the Main PCB Ass'y
Fig. 069
(l)Unsolder at seven positions to remove the Main PCB shield case.
(2)Remove the flex connectors at seven positions.
(3)Remove lead wires with connector at front and back.
Repair Information
(4)Remove three screws and one screw from the back and remove the Main PCB Ass'y.
Fig. 070
Fig. 071
Fig. 072 Fig. 073
22