Canon EOS DIGITAL REBEL XTI Service Manual page 40

12-5 Wireless flash:
13．LCD Monitor
13-1 Type:
13-2 Screen size:
13-3 Pixels:
13-4 Coverage:
13-5 Viewing angle:
13-6 Brightness
adjustment:
13-7 Angle adjustment:
13-8 Protective cover:
14．Playback
Image display format: 1)Single image
14-1
14-2 Display conditions:
Enabled with the 580EX, 550EX, 430EX, 420EX, MR-14EX,
MT24EX, or ST-E2.
⑴ Three-group (A, B, C) slave control, a flash output ratio (A:B)
control, FEB, and modeling flash (with flash output ratio) are
enabled.
⑵ The 430EX and 420EX can be used as slaves only, and the
MR-14EX and MT24EX can be used as the master unit only.
TFT color, liquid-crystal monitor
2.5 in.
Approx. 230,000 pixels
Approx. 100%
Approx. 160° vertically and horizontally
7 levels
・ Settable with menu's [LCD brightness].
・Gray chart displayed along with the image.
None
None
⑴ During the image display, press the
among normal (image+basic info), image only (no info)
and image info display (information+reduced image)
⑵ Press the left or right cross key to view the previous or
next image.
2)9-image index
・ During the image display, press the
between normal (9 images+basic info) and 9 images only
(no info)
3)Magnified zoom
・ During the image display, press the
switch between normal (magnified image+basic info) and
magnified image only (no info)
4)Auto play
5)Auto review right after shooting
⑴ Except when the menu's [Review time: Off] is set, the last
image captured is displayed.
⑵ When C.Fn-10-1 is set, the image can be magnified in the
image display right after shooting.
Images saved in Design rule for Camera File system format.
⑴ If the image is not in the Design rule for Camera File system
format, [?] is displayed on the LCD monitor.
⑵Also applicable to the index's thumbnail images.
35
General Information
DISP button to switch
DISP button to switch
DISP button to