Canon EOS DIGITAL REBEL XTI Service Manual page 122

<Disassembly Procedures>
1 ) Removal ofthe Shutter Ass'y and Shutter FPC.
Remove three screws and the Shutter Ass'y.
2 ) Remova I of the Finder Unit
(l)Remove the flex connector at three positions.
(2)Remove the lead wires temporarily in order to
work efficiently.
(3)Remove three screws and the Finder Unit.
Disassembly of Finder Unit
(l)Remove the SI FPC Ass'y with a pair of tweezers.
(2)Remove a screw and the SPC Holder.
(3)Remove the Exposure Processing FPC Ass'y with
a pair of tweezers.
(4)Remove the ILC Ass'y, being careful not to
damage the two screws.
Q!\IU@I l
I
After SI Ass'y and AE Sensor
FPC are removed, positioning
adjustment needs to be
performed. Be careful.
31
Repair Information
Fig. 099
Fig. 100
Fig. 101