Troubleshooting; General Troubleshooting - Qualcast MEH1533 Instruction Manual

Troubleshooting

General Troubleshooting

The following table provides solutions to common problems encountered with the mower.
Fault
Mower does not start
Poor floatation
Poor collection
Excessive vibration
Possible Cause
No power at mains socket
Defective on/off switch
Worn carbon brushes
Defective motor
Impeller is blocked by grass
Cut height too low
Grassbox fitted uncorrectly
Mowing in side to side
movements
Blade damaged
Blade fitted incorrectly
Customer Helpline 0845 077 8888
Solution
Check the fuse, switch,
socket, cable, wire and have
any repairs carried out by a
qualified electrician
Repair by a qualified technician
required
Disconnect from mains
and clean the deck and the
impeller.
Raise the cutting height
Fit the grassbox correctly
The mower collects at the
rear as users walk forward in
straight lines.
Replace blade
Fit the blade correctly
19