Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Qualcast MEB1234M
Summary of Contents for Qualcast MEB1234M
- Page 1 RM34 1200W Electric Rotary Mower (Model: MEB1234M) Instruction Manual...
- Page 5 Safety Warning Warning! Read these instructions carefully, familiarise yourself with the controls and the correct usage of the machine. Please keep the instructions safe for later use. Explanation of symbols on the machine Beware of hazard, Read instruction manual. Wear eye and ear protection. Do not use the machine in the rain or leave it outdoors when it is raining.
- Page 6 Warning. Beware of electric shocks. Keep the mains supply cord away from the cutting blade. Wait until all moving parts have stopped completely before touching them. The blade may continue to rotate after the machine is switched off, a rotating blade can cause injury. Noise level specification L in dB.
- Page 7 We accept no liability for damage or accidents which arise due to non-compliance with these instructions. General safety instructions Note: Only supply power to the equipment through circuit protected by an RCD with a maximum trip current of 30 mA. ►...
- Page 8 from the discharge opening. ► Before you attach or empty the grass collector, switch off the motor and wait until the blade has come to a standstill. ► The safety distance from the moving blade produced by the push handle must be maintained at all times.
- Page 9 ► Only push the mower at a normal walking pace. ► Be particularly careful when changing direction with the mower whilst working on a slope. ► Be particularly careful when you change the direction of the mower or pull it towards you. ►...
- Page 10 CAUTION! Read all safety requirements and instructions. Any errors made in following the safety requirements and instructions may result in an electric shock, fire and serious injury. Keep all safety regulations and instructions in a safe place for future use. - Do not use the lawnmower if the cords are damaged or worn.
- Page 11 Proper use The lawn mower if designed for use in private gardens. The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of misuse.
- Page 12 Curved handle assembly (Fig. 2b) - The top, curved handle section (5) is assembled to the bottom supports (10) using a bolt, washer and quick release fastener (6) on either side. Three height positions are possible. Adjust as necessary. - These fasteners should be folded in towards the bar using moderate force in order to lock them into position.
- Page 13 Grass full indicator -Your mower may be fitted with a grass full indicator. This is a small red flap on the top side of the grass collector. -When this flap remains open as you work, it means that the grass collector is not full.
- Page 14 Switching ON and OFF (Fig. 4) - Connect the equipment to your power supply socket. - Before switching on, ensure that the equipment is not in contact with any foreign objects. - To switch on, press the safety button (1) on the handle , then activate the start/stop switch lever (2).
- Page 15 Do not use the mower on gradients exceeding 15°for safety reasons. Take special care when moving backwards and pulling the lawn mower. Mowing advice We recommend that you mow in overlapping lines. Only mow with sharp blades so that the blades of grass do not fray. This can cause grass to turn yellow.
- Page 16 remove the grass collector holding its handle with your other hand.To maintain safety, the deflector guard will close when you remove the grass collector to seal the rear discharge opening. If any grass drops onto the ground, it is a good idea to pull the mower away from the area to make it easier to re-start the motor.
- Page 17 Important. Wear work gloves! Only replace the blade with a genuine replacement blade, as this will ensure top performance and safety under all conditions. Carry out the following steps to change the blade: ► Undo the fastening screw. ► Remove the blade and replace with a new one. ►...
- Page 18 Trouble Shooting Problem Possible Cause Corrective Action Check the switch, socket, cable, wire and No power at mains have any repairs socket carried out by an electrician Defective on/off switch Repair by a qualified Worn carbon brushes Mower does not start technician required Defective motor Set at a higher cut...
- Page 19 Argos Cat No. : 7304912 Supplier Model No.: MEB1234M Product Description: Lawn mower Complies with the requirement of the following directives: 2006/42/EC ----Machinery Directive 2006/95/EC ----Low Voltage Directive 2004/108/EC ----EMC Directive Test Lab Name: TÜV Product Service Ltd. Jiangsu Address: 10 Huaxia Road(M), Dongting, Wuxi, 214100, Jiangsu, P.R.C Number (Lab code for CE license): 0123 Technical documentation holder: Suzhou Cleva Electric Appliance Co.,Ltd.
- Page 20 After sales helpline number: 08456 400 800 Spare parts purchases: www.argosspares.co.uk...