Maintenance And Storage; Blade Maintenance - Qualcast MEH1533 Instruction Manual

Maintenance

Blade Maintenance

13
Switch off and remove the plug from the mains.
Removing the blade and fan. USE GLOVES.
• To remove the blade bolt
the blade bolt
• Remove the blade bolt
• Inspect for damage and clean as necessary.
Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner-regardless
of condition. If the blade is cracked or damaged replace it with a new one. Never use a blade
bolt if the insulated head is damaged cracked or missing.
Fitting the blade and impeller. USE GLOVES.
• Ensure the impeller
• Place the spacers
• Ensure the pegs have located into the holes on the blade and that the blade is positioned as
illustrated in figure 6.
• Place the blade bolt
• Tighten down clockwise by hand.
• Hold the impeller firmly and tighten the blade bolt with the spanner provided.
18
14
15
16
17
, hold the impeller
14
.
14
, blade , spacer
14 15
is located correctly.
17
onto the fan ensuring the pegs have located into the holes
16
through the centre hole of the blade.
14
Customer Helpline 0845 077 8888
firmly and with the spanner
17
and impeller .
16 17
provided loosen
10