Sony MAV-777 Operation Manual page 59

a Time value type
Indication Meaning
TCR Timecode value from LTC reader
TCR. Timecode value from VITC reader
UBR User bits from LTC reader
UBR. User bits from VITC reader
TM1 Time value for TM1
TM2 Time value for TM2
TCG LTC generator timecode value
TCG. VITC generator timecode value
UBG LTC generator user bit value
UBG. VITC generator user bit value
Note
If the time data is not read correctly, the asterisk mark is
displayed: "T*R", "T*R."
b Timecode reader drop-frame indication
A period (" . ") indicates drop-frame mode (factory
default).
A colon (" : ") indicates non-drop-frame mode.
c Timecode generator drop-frame indication
A period (" . ") indicates drop-frame mode (factory
default).
A colon (" : ") indicates non-drop-frame mode.
d VITC data field indication
A blank indicates fields 1 and 3.
An asterisk (" * ") indicates fields 2 and 4.
e Selected Port
The currently selected port (R1, P1, R2, P2 or RP) is
displayed. Also, when an external device is selected,
"T1" or "T2" is displayed.
When RP is selected in BVE mode while monitoring
R1, a small 'P' is displayed; and while monitoring P1,
a small 'R' is displayed.
f PB/EE Status
If the EE state is enabled when monitoring the
playback port, a small 'E' is displayed here. This is
not displayed when an external device is selected.
g Control VTR indication
This part of the display is in two parts, A and B.
• Part A: operating mode
• Part B: tape speed
A
Note
Indications
Part A Part B
STOP
F.FWD
REW
PLAY LOCK
REC LOCK
JOG STILL
JOG FWD
JOG REV
SHUTLE (speed)
VAR (speed)
PREROL
EDIT LOCK
STANDBY OFF*
TAPE UNTHREAD*
* Displayed only when an external device has been specified.
h File Name Display
When superimposing on the HD SDI OUT connectors, the
name of the file (up to 16 characters) loaded on the port
can be displayed using the lower half of the display.
Additional information displayed in the
BVE mode
When conducting nonlinear editing in the BVE mode, the
port name of the port being monitored, IN point, OUT
point, duration, edit channel, and the edit mode are
displayed. The position of the display is set with the "323
Linear Edit Message" item in the Setup menu.
For details, see description of initial settings in Section 3-4, "Setup"
(page 3-12).
3-5 Superimposed Character Information
B
Operating mode
Stopped
Fast forward
Rewind
Play
Recording
Still playback in jog mode
Forward playback in jog mode
(N indicator lights)
Reverse playback in jog mode
(n indicator lights)
Shuttle mode
Variable mode
Preroll mode
Edit mode
Standby off mode
Cassette not installed
3-35 (E)