Sony MAV-777 Operation Manual page 50

Item number Display indication
321 LINEAR EDIT NEW FILE
BI LENGTH
SUB MENU
LENGTH HOUR
LENGTH MIN
SHOW TC HOUR
SHOW TC MIN
SHOW TC SEC
SHOW TC FRAME
323 LINEAR EDIT MESSAGE
BI
SUB MENU
V POSITION
FADE TIME
TYPE
324 MAVE-F555 PORT
BI
SUB MENU
R SEL-VTR P1 KEY
R SEL-VTR P2 KEY
R SEL-MAV P1 KEY
R SEL-MAV P2 KEY
BG PORT
3-26 (E)
3-4 Setup
Expansion menu items (Continued)
Settings Description
Sets the BLACK/MUTING total file length in hours and minutes for the editing base in
the BVE mode.
Note:
The BLACK/MUTING file is created with the New Material command on
the control panel, or by pressing the NEW FILE key on the editing panel of
the MAVE-F555.
Sets hour units for total length.
0 .. 3
Sets minute units for total length.
0 .. 30 .. 59
Specifles the New file Show point time code. The time code at the head of the file is set
15 sec. before the Show point time code.
If no time code exists as with drop frames, then the nearest time code before the
specified time code is used.
HOUR : 00 .. 23
00
MIN : .. 59
SEC : 00 .. 59
FRAME : 00 .. 29
Sets the text information to be displayed in the BVE mode: current monitor port, file
number, and file name.
Sets the vertical position of the text information (0 ..
This item specifies how many seconds that changes in the display information will be
displayed before automatically disappearing.
Infinite : Always display.
1sec : Display for 1 second.
2sec : Display for 2 second.
3sec : Display for 3 second.
5sec : Display for 5 second.
10sec : Display for 10 second.
15sec : Display for 15 second.
30sec : Display for 30 second.
1min : Display for 1 minute.
Sets the text information display.
norm : Each type of information is displayed according to the operation.
full : Detailed information is normally displayed.
none : No information is displayed
This item specifies the port that is assigned to the port selection keys ([P1], [P2]) in the
F555 when the MAVE-F555 is connected to the MAV-777.
For details, refer to Section 3-4, "Recorder Selection Function," in the MAVE-F555
operation manual.
This item assigns the port in the MAV-777 that is selected by the [P1] and [P2] keys in
the F555 when the [VTR] key in the F555 is selected. Further, the [R] key is set to VTR.
none : No assignment to an MAV-777 port.
R1P1 : Assignment to the RP port in BVE mode.
P2 : Assignment to the P2 port in BVE mode.
P2 , R1P1
This item assigns the port in the MAV-777 that is selected by the [P1] and [P2] keys in
the F555 when the [MAV] key in the F555 is selected. Further, the [R] key is set to
R1P1.
none : No assignment to an MAV-777 port.
R1P1 : Assignment to the RP port in BVE mode.
P2 : Assignment to the P2 port in BVE mode.
EXT : Assignment to an external VTR.
P2 , none
It is also possible to assign different keys to the same ports.
For details, refer to the MAVE-F555 Operation Manual.
Specifies whether the background port (R2/P3) is used.
enable : Operations such as REC or STOP on the R2 port, or LOAD, PLAY, STOP
on the P3 port from the MAVE-F555 are permitted.
disable : Operations such as REC or STOP on the R2 port, or LOAD, PLAY, STOP
on the P3 port from the MAVE-F555 are prohibited.
1 .. 11)