Sony MAV-777 Operation Manual page 49

Item number Display indication
302 AUDIO FADE MODE P1
303 AUDIO FADE MODE P2
304 AUDIO FADE MODE P3
BI
SUBMENU
TYPE
TIME
307 ANALOG AUDIO EDIT
BI PRESET REPLACE
SUBMENU
CH 1
CH 2
CH 3
CH 4
317 PANEL MODE RECORDER
B PORT
320 MAVE-F555 CONTROL
BI
SUB MENU
FILE CHANGE TIME
DECISION BASE
GPI EP1 TIME(F)
GPI EP2 TIME(F)
Expansion menu items (Continued)
Settings Description
Specifies audio processing for the join between cuts produced by editing.
Note: For editing from the control panel, BVE mode editing is enabled only for
the TIME setting, and the TYPE is set for close fade.
X : Cross fade
V : V fade
CUT : No fade
20 m sec
1msec
2msec
4msec
5msec
6msec
When editing digital audio on the MAV-777 through a remote controller or an editor that
does not have the functions that control the digital audio edit presets, this item sets the
assignment of the channels to the editor's or remote controller's analog audio presets.
This setting can be made for all digital audio channels.
nodef : No setting.
ch1 : Follow the analog channel 1 edit presets.
ch2 : Follow the analog channel 2 edit presets.
ch1+2 : Follow either the analog channel 1 edit presets or the analog channel 2 edit
presets.
The default values for each channel are: CH1:ch1, CH2:ch2, CH3:nodef, and
CH4:nodef.
Sets the RECORDER port for editing from the control panel in the Panel mode.
R1P1 : Uses R1, P1 Port as the RECORDER port. The external device can be
selected as the Player only on EXT1.
R2P2 : Uses R2, P2 Port as the RECORDER port. The external device can be
selected as the Player only on EXT2.
Sets control of MAVE-F555 when it is connected.
Sets the time to output an image after a key is released when using the -/+ keys for file
switching.
0s .. 0.3s .. 0.9s
Sets the standard for A/V Split editing from the MAVE-F555.
video : Audio is split with Video as standard.
audio : Video is split with Audio as standard.
Performs offset control for the IN point of the GPI output. (GPI OUTPUT
CONFIGURATION item (menu 224)).
-90 .. 00 .. +90
Notes:
• When the player is an external VTR or when performing DMC editing,
the PREROLL TIME + GPI EPx TIME must be set so that it exceeds 2
seconds plus 2 frames.
• When trimming, the GPI EPx TIME must be set so that it exceeds -28
frames. In other editing situations, PREROLL TIME + GPI EPx TIME
must be set so that it exceeds 2 frames.
3-25 (E)
3-4 Setup