Table of Contents
Advertisement
output level. The current PB output level appears
around the control.
PR button
Pressing this button lights the indicator and allows the
VIDEO PROCESS control (o) to adjust the PR
output level. The current PR output level appears
around the control.
SET UP button
Pressing this button lights the indicator and allows the
VIDEO PROCESS control (o) to adjust the SET UP
output level. The current SET UP output level appears
around the control.
PROCESS CONTROL button
This sets the VIDEO PROCESS control mode for the
selected port. Each time you press the button, the
2-1-2 Control Panel
You can perform various editing operations from the
control panel on the bottom half of the front panel.
For details, refer to volume II of this operation manual.
2-6 (E)
2-1 Front Panel
control mode cycles through REMOTE, MENU,
LOCAL, REMOTE, and so on. The current mode is
shown by the PROCESS CONTROL MODE
indicators.
PROCESS CONTROL MODE indicators
These show the current VIDEO PROCESS control
mode for the selected port.
REMOTE: The internal digital video processor is
controlled with the HD Digital Video Controller
HKDV-503/900 (sold separately).
MENU: Indicates that the internal video processor is
under control of the Setup menu.
LOCAL: The internal video processor is controlled
by the VIDEO PROCESS control (o) on this
unit.
Advertisement
Table of Contents
