Table of Contents
Advertisement
>
Press
to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
7 Press the Menu Select button directly below Optn.
D
U
8
or
to Send and press the Menu Select button directly
below Sel to send the message.
D
U
9
or
to scroll through the address list and highlight the
required address.
OR
D
U
or
to {Other recpnt} and press the Menu Select
button below Edit.
A blinking cursor appears in the Enter address screen.
Use the keypad to type the address entry.
<
Press
to move one space to the left.
>
Press
to move one space to the right.
Press the Menu Select button below Del to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
10 Press the Menu Select button below Send to send the
message.
OR
Press the PTT button to send the message.
11 The display shows the screen and Sending msg.
12 If the message is sent, a tone sounds and the display shows
Msg sent.
OR
If the message is not sent, a low tone sounds and the
display shows Send failed.
If the message fails to send, the radio returns you to the main
TMS screen.
Note:
You can append a priority status and/or a request reply
to your message. See Using the Priority Status and
Request Reply Features on page 70 for more
information.
69
English
Advertisement
Table of Contents
