Table of Contents
Advertisement
Stopping SSA Notification of a Single Site Via
Manual Entry
Procedure:
>
<
1
or
to SSA.
2 Press the Menu Select button directly below SSA. The
display shows the Site Alert screen.
D
U
3
or
to Stop Alert and press the Menu Select button
directly below Sel. The display shows the Select Site
screen.
D
U
4
or
to {SiteID Entry} and press the Menu Select
button directly below Edit.
5 The display shows the Enter SiteID screen. Key in the
required Site ID and press the Menu Select button directly
below Send.
6 If a correct Site ID is entered, the display shows the Select
Alert screen.
OR
If a wrong Site ID is entered, the display shows Invalid ID
and prompts to enter the Site ID again.
7 If the request is successful, the display shows Req
successful.
OR
If the single site is not available, the display shows <Site
ID> not available.
OR
100
English
If the single site does not exist, the display shows <Site ID>
does not exist.
8 Press the Menu Select button directly below Exit to return
to the Home screen.
9 The SSA Alert for the designated site stops.
Stopping SSA Notification of All Sites
Procedure:
>
<
1
or
to SSA.
2 Press the Menu Select button directly below SSA. The
display shows the Site Alert screen.
D
U
3
or
to Stop Alert and press the Menu Select button
directly below Sel. The display shows the Select Site
screen.
D
U
4
or
to {All Sites} and press the Menu Select button
directly below Send. The display shows Sending req.
OR
If radio is out of range, roaming to a foreign system or in a
failsoft situation, the display shows Req failed.
5 If the request is successful, the display shows Req
successful.
OR
If one or more sites are not available, the display shows Not
all sites available. Repeat Step 3.
Advertisement
Table of Contents
