Table of Contents
Advertisement
6 Press the PTT button to initiate the call. During the call, the
display shows the subscriber alias.
7 Press and hold the PTT button to talk. The LED lights up
solid red.
OR
Release the PTT button to listen. The LED lights up solid
yellow.
8 If there is no voice activity for a preprogrammed period of
time, the call ends.
OR
The call ends when it reaches the maximum ring time.
Adding a New Contact Entry
Procedure:
>
<
1
or
(on the keypad mic.) to Cnts.
2 Press the Menu Select button directly below Cnts. The
entries are alphabetically sorted.
D
U
3
or
to {New Contact} and press the Menu Select
button directly below Sel.
4 The display shows Name. Press the Menu Select button
directly below Edit.
Use the keypad to enter the name.
<
Press
to move one space to the left.
>
Press
to move one space to the right.
Press the Menu Select button below Del to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
5 Press the Menu Select button directly below OK once you
have entered the name.
OR
Press the Menu Select button directly below Cncl to return
to the previous screen.
D
U
6
or
to {Add Number} and press the Menu Select
button directly below Sel. The display shows Type 1
<Default Type>.
7 Press Menu Select button directly below Edit.
D
U
8
or
to the required channel and press the Menu Select
button directly below OK.
47
English
Advertisement
Table of Contents
