Stopping Ssa Notification Of A Single Site Via Manual Entry - Motorola APX 6000 User Manual

4 or to select the desired Site Alias and press
the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req
successful.
If the site is not available, the display shows <Site
Alias> not available.
If the site does not exist, the display shows <Site
Alias>does not exist.
5 To return to the Home screen, press the Menu
Select button directly below Exit.
The SSA Alert for the designated site stops.
Stopping SSA Notification of a Single Site Via Manual
Entry
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu
Select button directly below Sel.
The display shows the Select Site screen.
4 or to [SiteID Entry] and press the Menu
Select button directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu
Select button directly below Send.
One of the following scenarios occur:
• If a wrong Site ID is entered, the display shows
Invalid ID and prompts to enter the Site ID
again.
• If a correct Site ID is entered, the display
shows Sending req.
• If the request is successful, the display shows
Req successful.
• If the single site is not available, the display
shows <Site ID> not available.
• If the single site does not exist, the display
shows <Site ID> does not exist.
6 To return to the Home screen, press the Menu
Select button directly below Exit.
157
English