Table of Contents
Advertisement
Tape Remaining
With this feature, you can display the remaining amount of tape on the TV screen, during
Recording or Playback a tape.
! Insert tape.
@ Press ON SCREEN on the remote control until the tape is running. The tape
remaining counter will display on the TV screen after few seconds as shown on
right.
The tape remaining computation will not be performed, if no tape is inserted to the VCR.
• If a tape with erasure protection tab removed is inserted, the tape remaining will display automatically after few seconds.
• During computation, REC will not functioning
• During recording, if a tape is remain 5 minutes, the tape remaining will display in flashing.
• When
and
tapes are used with a cassette adapter, the indication may not be correct.
• This function may not work properly for video tapes other than T-30, T-60, T-90 and T-120 or video tapes other than standard
tapes.
• The tape remaining does not operate when EJECT is pressed.
• During Fast Forward (FF) or Rewind (REW), the tape remaining calculation displayed may be different.
• The indicated lenght of tape remaining is only an approximate guide.
Recorded Section Auto Repeat
With this feature, if the recorded portion has finished and non-
recorded portion has continued for 15 seconds, the tape will
automatically stop, rewind to the beginning and repeat
playback.
! Press AUTO REPEAT on the remote control. The "
@ When a non-recorded portion has continued for 15 seconds after the recorded portion has finished, the
tape will stop and begin rewinding.
# The tape will rewind to the beginning and repeat playback.
$ To turn off the Recorded Section Auto Repeat function, press AUTO REPEAT once more.
• You can also set the Recorded Section Auto Repeat mode by selecting "ON" on the SET UP-selection screen. (The AUTO
REPEAT mode is preset to OFF at the factory.)
• The ON/OFF status of the Recorded Section Auto Repeat can be checked when ON SCREEN is pressed to display OSD.
(The "
" mark lights when the Recorded Section Auto Repeat is on.)
• If the Recorded Section Auto Repeat is on and the tape is rewound to the beginning with rewind or reverse video search, the
tape will automatically start playback.
Auto Zero Back
This function automatically forwards or rewinds the cassette to the "0:00.00" point. Use this function to return to
a recording start point.
! Reset the counter to "0:00.00" with CANCEL before recording.
@ Press REC to start recording.
# After recording the desired program, press STOP to stop recording.
$ Press ZERO BACK to return to the recording start point (0:00.00).
• During Auto Zero Back, if the VCR rewinds (or fast forwards) the tape all the way without finding the "0:00.00" point, it will
stop at the beginning (or end) of the tape.
• The counter start point "0:00.00" may differ slightly from the starting point on the tape.
• This function is not operable during recording, recording pause, simple recording timer or timer recording.
36
" mark will appear on the screen for 3 seconds.
R E M . 1 : 0 0
0 : 6 0 . 0
P L A Y
Advertisement
Table of Contents
