1-2. Opening, closing and locking the doors
NOTICE
To prevent back door closer malfunction
■
Do not apply excessive force to the back door while the back door closer is operat-
ing.
To prevent damage to the power back door
■
Make sure that there is no ice between the back door and frame that would pre-
●
vent movement of the back door. Operating the power back door when exces-
sive load is present on the back door may cause a malfunction.
Do not apply excessive force to the back door while the power back door is oper-
●
ating.
Take care not to damage the sensors (installed on the right and left edges of the
●
power back door) with a knife or other sharp object. If the sensor is disconnected,
the power back door will not operate in automatic operation.
66
LX570_OM_OM60L21U_(U)