Table of Contents
Advertisement
4-3. Do-it-yourself maintenance
CAUTION
Replacing light bulbs
■
Turn off the headlights. Do not attempt to replace the bulb immediately after turn-
●
ing off the headlights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. When it is
●
unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid
getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failing to do so may
●
result in heat damage, fire, or water entering the headlight unit. This may damage
the headlights or cause condensation to build up on the lens.
Metal components
808
LX570_OM_OM60L21U_(U)
While the low beam headlights are turned
●
on, and for a short time after they have
been turned off, metal components at the
rear of the headlight assembly will be
extremely hot.
To prevent burns, do not touch these metal
components until you are certain they have
cooled down.
Advertisement
Table of Contents
