Table of Contents
Advertisement
2-4. Using other driving systems
■
When approaching three-dimensional objects
The estimated course lines target a flat surfaced objects (such as the
road). It is not possible to determine the position of three-dimensional
objects (such as vehicles) using the estimated course lines and dis-
tance guide lines. When approaching a three-dimensional object that
extends outward (such as the flatbed of a truck), be careful of the fol-
lowing.
● Estimated course lines
292
LX570_OM_OM60L21U_(U)
Visually check the surroundings
and the area behind the vehicle. In
the case shown in the illustration,
the truck appears to be outside of
the estimated course lines and the
vehicle does not look as if it hits the
truck. However, the rear body of
the truck may actually cross over
the estimated course lines. In real-
ity if you back up as guided by the
estimated course lines, the vehicle
may hit the truck.
Estimated course lines
Advertisement
Table of Contents
