Table of Contents
Advertisement
2-4. Using other driving systems
The indicator light stops blinking, and comes on continuously to indicate that the
shift is completed.
Easy access mode is available if the following conditions have been met:
● The vehicle height mode is in normal mode.
● The vehicle is stopped on a flat surface.
● The shift lever is in "P".
● The side door and the back door are not opened from the vehicle stopped to
the "ENGINE START STOP" switch is turned to off.
The following method will cancel the vehicle lowering operation and raise the
vehicle again:
● Press the height control OFF switch.
● Push the height select switch to "".
Disabling the height control
Operating conditions
■
The engine must be running.
●
Vehicle height control must be turned off.
●
All side doors and the back door must be closed.
●
322
LX570_OM_OM60L21U_(U)
When the height control OFF
switch is pressed with the vehicle
stopped.
The "OFF" indicator will appear on
the multi-information display, and
the vehicle height will be fixed in
the current mode. Push the switch
again to turn the system back on.
Advertisement
Table of Contents
