Canon CP-10 User Manual page 21

3
Push the paper cassette all
the way into the paper
cassette slot, so that it clicks
into place.
• Be sure the paper is set correctly before
pushing the cassette in.
• Insert the paper cassette evenly so that it
slides over the bottom of the slot entrance.
The printer outputs the finished prints into the
receptacle onto the top of the printer
cassette. Be sure to close the middle cover
so that output can proceed normally.
20
Middle cover
• Please use specified paper types only.
• Be sure to fan the paper stack (so that the
sheets won't stick together) before loading
the paper into the cassette.
• Please also refer to "Proper Usage and
Handling" for advice about proper paper
handling. ( p. 12)
• Do not bend or tear off perforated edges on
the paper prior to printing. Doing so may
cause the part of the ink sheet to be
wasted. (The ink sheet is just long enough
to print to all of the paper in the ink/paper
set. Wasting part of the ink sheet will cause
it to run out too soon.)
• Never print on a sheet of paper more than
once, even if the first printing has left the
paper completely blank. The coating applied
to the paper as it passes through the printer
makes it unsuitable for further use. Reused
paper may stick to the ink sheet, resulting in
damage to the printer.
• Do not remove the paper cassette while
feeding, printing, or ejection is in progress.