Canon CP-10 User Manual page 15

• Remember to remove the slack from the ink
sheet before installing the ink cassette.
To take up the slack, push in the blue circle
and turn it in the direction of the arrow
embossed on the top of the cassette.
• Do not touch or pull on the ink sheet.
• Do not touch the print side of the paper with
your fingers. Always hold the paper along the
edges (outside the perforated border). Be sure
that hands are dry before touching the paper,
and do not scratch on the paper surface with a
hard object. Keep the paper surface away from
dust, water droplets, etc.
14
• Do not tear or bend the paper's perforated
edges before printing.
• Do not use label sheets on which labels are
partially peeled off.
• Paper must be printed on the glossy side (the
Blue circle
side without any printed markings).
Always load paper into the cassette with the
glossy side up. Loading the paper the wrong
way may result in poor print quality, and in
some cases may cause damage to the printer.
• Do not write on the paper before printing.
Writing on paper before printing to it may result
in malfunction.
• You may write on the back of the paper with an
oil-based pen, but to avoid smudging please
allow ink time to dry before touching it.
RIGHT WRONG