Canon CP-10 User Manual page 25

Problem
The printer does
not print.
Printing stopped
midway.
The printer's
indicator glows red
without the
camera's LCD
monitor displaying
any error message.
Print quality is not
good.
24
Cause
Too much slack in the ink cassette's
ink sheet.
The paper cassette is not pushed
all the way in.
The printer has overheated.
The printer is not correctly
connected to the camera.
There is a malfunction in the printer.
You are not using the correct paper
type.
Paper is loaded wrong-side up.
The ink sheet or paper is dirty.
Correction
Take up the slack.
Load the paper cassette correctly (
p. 19).
Wait for the printer to cool down.
Connect the direct interface cable
correctly. ( p. 18)
Remove the paper from the paper
handling slot and take up any slack in
the ink sheet. And then unplug the
power cable from the printer's DC IN
terminal and plug it back in.
Use the designated paper type.
Load the paper correctly (glossy side
up).
Use a clean ink sheet and clean
paper.