Do you have a question about the LAM1763 and is the answer not in the manual?
Questions and answers
Tehmina
February 5, 2025
How to start lam1763 ceramic induction hob
1 comments:
Mr. Anderson
February 10, 2025
To start the Lamona LAM1763 ceramic induction hob:
1. Ensure a suitable pan is placed on the cooking zone. The hob only uses power when a pan is detected. 2. Use the control panel to turn on the hob. 3. Select the desired cook zone. 4. Adjust the power level using the (+) and (-) keys.
The hob will start heating once these steps are completed.
Page 1
Ceramic LAM1763 Induction Hob User & Installation Guide...
Page 2
LAMONA Appliances Dear Customer, Congratulations on your choice of hob which has been designed to give you excellent service. The user manual will help you use your product in a quickly and safely. • Please read this user manual before installing and using the hob.
User manual LAM1763 Index 01 - Before using the hob 02 - Safety General Fire safety advice If a pan catches fire Deep fat frying If you have an Electrical Fire Avoiding damage to the appliance 03 - Using your hob Touch controls Controls Layout Minute Minder Timer Auto switch off Pan detection Child lock...
LAMONA Appliances 01 - Before using the hob • Make sure that you have removed all packaging, wrappings, stickers and films from the hob surface. • It is recommended that you clean and wash the hob surface before using for the first time. • Apply a thin coat of ceramic hob cleaner to the hob to help maintain and protect it. 02 - Safety WARNING! This appli- made by children without supervision.
User manual LAM1763 hazard. • Always match the size of pan to the cook zone If the surface is cracked, – do not use large pans broken or shattered, switch on small zones or vice off the appliance to avoid versa.
LAMONA Appliances into contact with a warm zone individually or (by hob. Never leave them the central on/off key if close to, or on top of the touch control) when you hob. have finished cooking, do not rely upon the au- • Never use the hob...
User manual LAM1763 Fire Service ate a fireball. If a pan catches fire: If you have an electrical fire in the kitchen: • Do not move it as it’s • Pull the plug out, or likely to be extremely switch off the power at hot.
Page 8
LAMONA Appliances with the appropriate Objects that melt and regulations. things that boil over can burn onto the ceramic glass The ceramic glass can and should be removed as get hot whilst cooking; even soon as possible. To avoid though the cook zone itself damage to cookware and does not generate heat.
User manual LAM1763 03 - Using the hob Touch Controls Central On/Off switch. The touch controls for your induction hob have been designed to provide you with finger tip control of The central on/off switch enables all of the cooking your hob, providing accurate and repeatable power zones to be switched off simultaneously at a touch settings for cooking and an easy clean surface of a key.
LAMONA Appliances Power Boost When the time is up Temporarily boost the power to the front left and rear right cook zones by approx 15% ‘P’. The zones 1) The minute minder will bleep and the timer can be boosted for a period of up to 5 minutes.
User manual LAM1763 When the time is up Note: This means the hob only uses power when a suitable pan is placed on the zone, this reduces 1) The timer display will flash, the timer will beep the energy used during the cooking process, i.e. and the cook zone will automatically turn off.
LAMONA Appliances Pans & cookware for induction Smallest Recommended Pan Cook Zone Diameter hobs. 130mm Pans and cookware for induction cooking Auto power tuning zones must be made of metal and have magnetic Induction hobs have a unique power tuning system properties.
Page 13
User manual LAM1763 The cook zone itself does not heat up, but the This induction hob complies with the applicable ceramic glass does get hot because of the hot pan EMC and EMF standards. Therefore it should not conducting heat back onto the hob glass.
LAMONA Appliances 04 - Cleaning & maintenance Ceramic glass hobs function of the appliance. Safety when Cleaning • It is recommended that you clean and wash • For cleaning, the appliance must be switched the hob surface before using for the first time. off and cooled down. Apply a thin coat of ceramic hob cleaner to the •...
User manual LAM1763 05 - Troubleshooting If you encounter a problem, it is often something minor, please read some of the suggested tips below. The hob produces a smell the first few times This is normal - Heat a pan full of water on each zone for half an hour.
LAMONA Appliances 06 - Installation General information Positioning Installation should only be carried out by a qualified Choosing your installation installer or engineer. • Make sure that the air inlets through the ventilator grids underneath the hob are never Please keep to the following points most carefully; blocked.
Page 17
User manual LAM1763 Clearances and dimensions – requirements The worktop must be of heat-resistant material or • No shelf or overhang of combustible material covered with heat-resistant material. should be closer than 650mm above the hob. Protecting the cut-out • There must be a minimum clearance of 50mm...
Page 18
LAMONA Appliances Fixing Brackets CONVENTIONAL INSTALLATION Installation advice : Depending on the cabinets, the worktop thickness and the hob positioning, it is possible for the hob base and/or the clamp brackets to interfere with parts of the cabinet. Worktop If necessary cut away cabinetry and use appropriate...
User manual LAM1763 Connect to the electricity Supply are supplied in the instructions/fittings bag This appliance must be earthed. Only connect to the electrical mains terminal with the power Fit the cable clamp & secure with the screw switched off. The electrical mains terminal is live.
LAMONA Appliances Technical data Technical Data Electrical Supply 220~240V 50Hz Total Power Rating @ 220 - 240V ~ 50Hz (kW) Hob Details Normal Power Power Boost Cook Zone Rating kW Rating kW LH Front 1.85 LH Rear RH Rear 1.85 RH Front Hob Dimensions (W X D X H) mm...
User manual LAM1763 07 - Your guarantee Product Guarantee Details (UK only) Your appliance has the benefit of a comprehensive manufacturer’s guarantee which covers the cost of breakdown repairs. (Details of which are shown on your Proof of Purchase Document). • Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE PROOF OF PURCHASE) • The product must be correctly installed and operated in accordance with the manufacturer’s instructions and used for normal domestic purposes.
Page 24
083352301 If supplied, please stick your self adhesive product rating plate here, or make a note of the product serial number below in the box below for future reference. Serial Number : ...................
Need help?
Do you have a question about the LAM1763 and is the answer not in the manual?
Questions and answers
How to start lam1763 ceramic induction hob
To start the Lamona LAM1763 ceramic induction hob:
1. Ensure a suitable pan is placed on the cooking zone. The hob only uses power when a pan is detected.
2. Use the control panel to turn on the hob.
3. Select the desired cook zone.
4. Adjust the power level using the (+) and (-) keys.
The hob will start heating once these steps are completed.
This answer is automatically generated