Page 1
LEDJ TABLE OF CONTENTS Q Batten 1. Safety Instructions 2. Technical Specifications 3. How to set the Unit 4. DMX 512 Address setting 5. How to control the Unit 6. Troubleshooting 7. Fixture Cleaning User Manual Order code: LEDJ300...
Page 2
1. Safety Instructions Do not open the unit within five minutes after switching off. The housing and lenses must be replaced if they are visibly damaged. Please read the instructions carefully as they include important This lighting fixture is for professional use only - it is not designed for or information about installation, usage and maintenance.
Page 3
Light source: 5 pcs x 5W Quad-colour (RGBA) LEDs Slave mode SLAV Dimensions: 580 x 100 x 133mm Sound SU00 SU 00~99 Sensitivity 2/3 channel mode Weight:1.82KG Channel Mode 2CH/3CH/4CH/7CH 4/7 channel mode Power socket: IEC IN/OUT DMX Address A001 A001 –...
Page 4
5. How to Control the unit Fade Mode 5.1. Master/slave built-in preprogram function There is no need to turn the unit off when you change the DMX address as the Press the MENU button to select Press the ENTER button and the new DMX address setting will take effect at once.
Page 5
4 CHANNEL MODE 5.5. Optional IR Remote Channel Value Function 0-255 Red 0-100% 0-255 Green 0-100% 0-255 Blue 0-100% 0-255 Amber 0-100% 7 CHANNEL MODE Channel Value Function 0-255 Master dimmer 0-255 Strobe 0-255 Red(0-100%) 0-255 Green(0-100%) 0-255 Blue(0-100%) 0-255 Amber(0-100%) Button functions: No function...
Page 6
The “R”, “G”, “B” and “W” buttons are used to set the brightness for the Red, • The I.R Remote is not usable when the fixture(s) are being controlled by Green, Blue and White/Amber/UV LEDs, to change the brightness use the “+” a DMX controller.
Need help?
Do you have a question about the Q Batten LEDJ300 and is the answer not in the manual?
Questions and answers