Audio Settings - Blaupunkt BCR-9 DABi Instruction Manual

FM Mode (Cont.)
Scan Settings
This enables you set FM scans stop at stations with strong signal or stop at any available
station.By default, FM scans stop at any available station. This may result in a poor signal-to-
noise ratio (hiss) from weak stations.
1. Press MENU button, turn SCROLL/SELECT knob to select "Scan setting", and then
press SCROLL/SELECT knob to confirm.
2. Display will show "Strong stations only?", turn SCROLL/SELECT knob to select
"YES", and then press SCROLL/SELECT knob to confirm. The scans stop only at
stations with good signal strength.
3. Turn SCROLL/SELECT knob to select "NO", and then press SCROLL/SELECT knob
to confirm. The scans stop at any available station. This may result in a poor
signal-to-noise ratio (hiss) from weak stations.

Audio Settings

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, turn SCROLL/SELECT knob to
select "Audio setting", and then press SCROLL/SELECT knob to confirm.
2. Display will show "Listen in Mono only?", turn SCROLL/SELECT knob to select "YES",
and then press SCROLL/SELECT knob to confirm.
22