6.0 Fire Alarms
Upon a fire alarm, the bell/siren will emit three "squawks" at 2
second intervals until silenced or reset by entering a valid
access code. If the zone is a Delayed Fire Zone, there is a
delay before the system contacts the monitoring station. This
will prevent unnecessary reporting of false alarms. If there is
no fire condition, contact your monitoring station immediately
to avoid an unnecessary response.
What do I do if a delayed fire zone was set off accidentally?
1. Press the [
2. Try to correct the problem.
3. If the problem persists, the alarm will sound again. Press
the [
CLEAR
These steps will instruct the system to delay reporting the fire
alarm to the monitoring station (see Figure 5 on page 34).
] key within 30 seconds of the alarm.
CLEAR
] key again.
Spectra Keypads 33