2.6 Trouble Display
Your alarm system continuously monitors fourteen possible
trouble conditions. Most of these trouble conditions can be
reported directly to your monitoring station.
We strongly suggest that you inform your monitoring
station of the trouble and allow them to service your
system.
The keypad can be programmed to emit a
seconds whenever a new trouble condition has occurred.
Press the [
] key to stop the "Trouble Beep".
TRBL
For Spectra 1689 LED Keypad Module:
When a trouble condition occurs, the [
symbol will illuminate.
How do I access the Trouble Display?
1. Press the [
The [
] symbol will flash and number(s)
TBL
corresponding to the trouble(s) will illuminate.
2. Read the corresponding explanation of
the trouble from the Trouble List on
page 8. If no repair instructions are
given, call your monitoring station for
repairs.
3. Press the [
] key.
TRBL
] key to exit.
CLEAR
every 5
BEEP
TRBL
Spectra Keypads 7
]