Atis" (Setting Of Atis Code And Activation – Deactivation Of Automatical Transmission) - Midland neptune User Manual

appropriate authority.
Be careful to insert the correct personal MMSI code. Once the code has been saved, it
cannot be modified.
1. Press the function key "DSC".
2. Press the function key "Menu".
3. Press the function key "More".
4. Press the function key "MMSI". The display will show:
5. To insert the personal MMSI code press the function key to the right
under the arrow corresponding to the script "DSC". The display will
show the message "Enter MMSI" (Y)
6. Insert the 9 digits, for example 900000000 and press the E-button in
order to confirm, now on the display appears: (Z)
7. To programm the MMSI code, press the function key corresponding to
" " situated right below.
8. On the display will appear the message "Enter Group MMSI", now
program 8 numbers (the first fixed number is 0 (zero)) and confirm by
pressing the E-button.
It is possible to change the MMSI group code whenever you want, while
the personal MMSI code can be inserted only one time; for this reason,
we recommend to pay attention.
If you have accidentally inserted an incorrect code, you will have to
return the device to your approved vendor for a complete reset.
10.11 "ATIS" (Setting of ATIS code and activation - deactivation of automatical
transmission)
Be careful to insert the correct code. Once the code has been saved, it cannot be modi-
fied.
1. Press the function key "DSC".
2. Press the function key "Menu".
3. Press the function key "More".
4. Press the function key " More".
5. Press the function key "Atis".
6. The display will show: (AA)
7. Press the key corresponding to .
8. On the display will appear the message "Enter atis MMSI". The ATIS
ID number is a ten-digit number (given by the authorities), always be-
ginning with "9". The first number "9" is stored already, thus it is need
only to enter the following 9 digits. Example: You received from the
authorities the ATIS code 9 211015923.
9. Insert the last 9 digits 211015923 and confirm by pressing the E-but-
ton. The display will show: (AB)
Your marine transceiver is able to activate, if necessary, an automa-
tic transmission of your ATIS identification code each time the PTT is
released. This function is only used when navigating in internal navigable
European waters which require automatic transmission of identification.
The user can request an ATIS code from the same organization in their
community which licenses radio operators. Program the code as descri-
bed previously.
1. In order to activate it, press the function key correspondent to "Atis
disable". On the display will appear: (AC)
2. Confirm by pressing one of the following buttons: 16, C or PTT.
Y
Z
AA
AB
AC
27