Dir" (Entries In The Directory) - Midland neptune User Manual

10.5 "Dir" (Entries in the directory)

You can insert into the directory the MMSI codes from frequently called stations, by giving them
a name (e.g. vessel or owner). Then you can search and use them more comfortably. When
receiving a call, MMSI owner name and MMSI code will be displayed.
1. Press the function key "Menu".
2. Press the function key "More".
3. Press the function key "Dir".
4. At this point you enter to the directory pages. If no MMSI owner ad-
dress was stored, the display will show "Entry", throughout it has been
stored one or two MMSI owner addresses, the type of indication will
appear as follows:
5. By pressing the function key "Add" you will have the possibility to add
further MMSI addresses. By pressing the function key "VIEW" you will
have the possibility to modifiy/cancel the address shown on the display.
10.5.a Addition of addresses
1. Press the function key "Add".
2. With the alphanumerical keypad (the keys are associated with letters like on a cellular phone)
you are able to write the name you want to associate with the MMSI code (f.e. TOM), then press
the E-button to confirm.
3. After the pressure to the E-button, on the display appears th cursor in
correspondence to "MMSI"
Write the identification code using the alphanumerical keypad (obliga-
torily 9 digits)
4. Press the E-button to confirm.
10.5.b To modify/cancel addresses
1. Press the function key "View".
2. Select with the function keys "Next " or "Back" the address you desire to modify/cancel.
3. Press the function key "Edit".
4. If you desire to change the name or the code, press one of the 2 func-
tion keys associated to the name or the MMSI code " ".
5. If it is desired to eliminate completely the directory, press the func-
tion key "Del" and confirm by pressing subsequently the function key
"Yes".
If it is desired to cancel the operation, press the function key "NO".
It is possible to memorize max. 16 addresses. If the directory is filled up,
on the display will appear the indication "Full" and it will not be possible
to add further addresses. In this case it is necessary to cancel some.
10.6 "Posn"(Setting of position coordinates and adjustment of UTC time)
1. Press the function key "DSC".
2. Press the key "Menu".
3. Press the key "Posn".
4. To insert the coordinates press the function key "Posn" and through the alphanumerical keypad
set up the coordinates.
5. Confirm by pressing the E-button. If "nonexistent" coordinates have been inserted, Neptune
will emit a double error beep rendering necessary the re-insertion.
6. In order to set the time, press the function key corresponding to "UTC" and confirm through
the E-button the executed operation. An eventual error message will indicate the wrong entry
of time data.
U
V
W
25