Activation Of Dual Watch/Triple - Midland neptune User Manual

6.3 Activation of Dual Watch/Triple

To activate Dual or Triple watch:
• Dual watch - Select a desired channel and press the D/W-button. The Display will indicate
"D/W" and you will see the two monitored channels.
The Dual Watch function can be stopped in 5 different modes: by pressing the PTT- or the "16"
buttons on the microphone, "D/W"- or "C"-buttons or by sending out a DSC-call.
• Triple watch – select one of the 2 channels you desire to monitor to-
gether with channel 16. Hold pressed the function key corresponding
to the written T/W until you hear two beeps. Now on the display ap-
pears the indication "User".(F). Move now to the second channel you
desire to monitor, press the function key corresponding to the indica-
tion T/W. Now you will see all three channels sliding on the display with
indication T/W. "Adv" appears too, that, similar to SCAN function, has
the aim to exclude momentarily the monitoring of the current channel.
The Triple Watch function can be stopped by pressing the C-button,
the PTT- or the 16-buttons or by sending out a DSC call.
For both modes, the operation can be reassumed with the following
diagram:
F
17