Control - Dürkopp Adler 559 Operating Instructions Manual

13.3 Control

1
Maintenance work to be done
Automatic buttonholer
Clean the area under the needle plate of sewing dust
Check the oil level
Check and clean the toothed belts
Oil the punch 1
Oil the clamp arms 3 and the felts 2
Oil the felt 6 on the cam disc
Pneumatic system
Check the water level in the pressure regulator
Clean the filter insert in the maintenance unit
Check the system for leaks
34
Caution: Danger of Injury !
Turn the main switch off.
The maintenance of the automatic buttonholer must only be
carried out with the machine switched off!
ATTENTION !
If the automatic buttonholer has not been used for a long time or after
assembling the machine, oil the wicks, felts, looper and needle bar
components (see Installation Instructions chapter 10).
6 3 2
Operating hours
8 40 160 500
X
X
X
X
X
X
X
X
X