Table of Contents
Advertisement
清潔與保養
開關 Switch
機箱 Hood Body
馬達 Motor
底蓋 Bottom Cover
可拆螺絲 Screws
3. 依順時針方向將接油盤除下。
4. 將鎖緊帽按順時針方向旋鬆，取出風輪。
5. 清潔時，內外表面可用軟布沾中性清潔劑
擦拭並用清水擦拭，注意避免刮花機身內
外表面。
6. 清潔後，按上述相反的程序裝上，請檢查
底板上的掛勾與機身凹槽是否可靠接合，
以策安全。
Care & Maintenance
3. Detach the oil collecting trays by turning
them clockwise.
4. Loosen the locking caps by turning the caps
clockwise and take out the turbine impellers.
5. Use a soft cloth to clean the inner and outer
surfaces with a mild liquid detergent, and
then rinse the trays with water. Avoid using a
rough or metal brush to scrub the surface.
6. After cleaning, assemble the parts in reverse
order as shown above. To ensure safety,
make sure that the bottom cover is securely
hooked with the hood body.
P.12
安全開關 Safety Switch
油杯 Oil Container
風輪 Turbine Impeller
接油盤 Oil Collecting Tray
鎖緊帽 Locking Cap
護網 Safety Mesh
小油碟 Oil Cup
Advertisement
Table of Contents
